Techgenix Solution

1        Features  

•        3.5- to 28-V Input Voltage Range

•        Adjustable Output Voltage Down to 0.8 V

•        Integrated 80-mΩ High-Side MOSFET Supports                                           up to 2 A Continuous Output Current                           

•        High Efficiency at Light Loads with a Pulse Skipping Eco-mode™

•        Fixed 570-kHz Switching Frequency

•        Typical 1-μA Shutdown Quiescent Current                    

•        Adjustable Slow-Start Limits Inrush Currents

•        Programmable UVLO Threshold

•        Overvoltage Transient Protection                                

•        Cycle-by-Cycle Current Limit, Frequency Fold Back and Thermal Shutdown Protection

•        Available in Easy-to-Use SOIC8 Package

Product Specification Product DescriptionDescription:XL6009 is a 4A switch current high performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577. The XL6009 booster module has lower cost and better performance, and the LM2577 module is about to be eliminated.
Specifications:Input Voltage: 4.2-32VOutput Voltage: 5-52VMaximum Input Current: 4ATransfer Efficiency: 94%Output Ripple: 50mVOperating Temperature: -40???~+85???Switching Frequency: 400KHzOutput Ripple: 30mV (the higher the voltage, the greater the current, the greater ripple)Features:XL6009 Step-up Power Module uses XL6009 as main control chip to realize broader scope of application about boosting.It shows the adjusted results intuitively with the digital tube.There is no need to use the multimeter, which will be more convenient.Equipped with the Schottky diode,you need not to be worried about wrong operation.It adds ventilation hole on PCB to enhance the capacity of heat dissipation.Package Included:1 x XL6009 Digital Step Up Power Supply Module Adjustable 4.5-32V to 5-52V Step-up Voltage Regulator With Display

Product Specification Product Description

1. Current Sense for each motor.
2. Heatsink for better performance.
3. Power-On LED indicator.
4. Double H bridge Drive Chip: L298N.
5. Operating Voltage(VDC): 5~35
6. Peak Current (A): 2
7. Continuous Current (A): 0-36mA
8. No. of Channels: 2
9. Over-Current Protection (A): Yes
10. Thermal Protection: Yes

Product Description

This is an Adjustable Synchronous Step-down module a DC to DC buck converter module with an input voltage range of 6.5V-60V and an output of 1.25-30V. This output is variable and can be varied using the on-board multi-turn potentiometer.

Features:

1. High Precision adjustable potentiometer.
2. Clockwise for higher voltage, Counterclockwise for lower voltage.
3. Effectively filter out high-frequency noise.

Specifications:

Product Specification Product Description

he 10A DC-DC Step-down Adjustable Constant Voltage Module can be used to get adjustable output voltage ranges from 1.5V to 35V. The module provides a wide range of current output up to 10 A. With heat sink mounted it can easily manage to run high power application continuously (provided that for continuous high power output you need to use a cooling fan on the heat sink).

The Module is made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%); and therefore it is particularly most suitable for LED driver applications. The output current of the module can be raised up to 10A(for continuous use it is recommended up to 8A with additional cooling fan).

To enhance the stabilization in output voltage has four high-frequency capacitance which gives the lower output ripple. Double heat sink design provides easy and fast heat dissipation. MOS Schottky diode independent heat sink, which heat dissipation is good, and won’t affect each other. Also using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever.

The module has onboard 3296 multiturn potentiometers for high accuracy voltage and current regulation to provide good stability. As voltage and current are adjustable, it gives very easy to use at multiple Application such as battery charging, LED Driver power supply, Vehicle Power Supply, etc which makes the module Multipurposeand hence this module is always in demand from our maker because of its wide range of application and low cost.

Applications:

1. High-power LED driver.
2. Lithium battery(or lead accumulator) charge.
3. Vehicle-mounted power supply.
4. Low voltage system power supply.
5. 6V, 12V, 14V, 24V battery charge.
6. On-board laptop power supply.
7. regulated power supply.
8.Low voltage power supply system.

Product Description 

XH-M603 HW-632 Charging Control Module is a 12-24v Storage Lithium Battery Charger Control Switch Protection Board With Led Display. It is Used in Variety of Applications.
Application Fields: 12-24v Storage Battery  . It is Applicable to Solar Cells, New Energy Batteries, Lead-acid Batteries, Nickel-cadmium Batteries, Nickel-metal Hydride Batteries, Lithium-ion Batteries, Polymer Batteries, Car Battery, Electric Car Battery
Using Method:
1. Set Starting Voltage: in Normal Display Voltage State, Press the Button Will Display Start Charging Voltage; Long Press for 3s the Digital Tube Will Flash: You Can Start or Stop Button to Set Starting Up Charge Voltage Value.
2. Set Stop Voltage: in Normal Display Voltage State, Press the Button Will Display Stoping Charge Voltage;long-press the Button for 3s the Digital Tube Will Flash; You Can Start or Stop Button to Set Stoping Charge Voltage Value.
3. Factory Reset: in Power-on State Press the Start/stop Button at the Same Time, a Digital Tube Will Display 888; That Represents Factory Reset Settings.Note: This Product is Available in Two Different Variant(Xh-m603 and Hw-632) With Same Working We Will Ship It Randomly.
Features: .Automatic Control Circuit Connection .Automatic Charging and Power Off .Real-Time Voltage Monitor .Autosave Setting .ST Core Chip .LM2596 Switch Voltage Regulator
15 Days WarrantyThis Item is Covered With a Standard Warranty of 15 Days From the Time of Delivery Against Manufacturing Defects Only. This Warranty is Given for the Benefit of Robu Customers From Any Kind of Manufacturing Defects.  Reimbursement or Replacement Will Be Done Against Manufacturing Defects.
What Voids Warranty:If the Product is Subject to Misuse, Tampering, Static Discharge, Accident, Water or Fire Damage, Use of Chemicals & Soldered or Altered in Any Way.